Comet

Classic access panel – flange type

Access panels shall be Comet Classic type as manufactured by Studform, featuring flange type construction.

Flange type access panels shall be fitted after drywall or ceiling material is installed and flushed.

Access panels shall be of a (300x300, 450x450, 600x600) nominal size, key lockable, with 110 degree concealed hinges.

Access panels shall be constructed from a 0.95 BMT pre-primed zincanneal main frame with mitred and welded corners, and a 16mm HMR MDF door.

Classic access panel – set bead type

Access panels shall be Comet Classic type as manufactured by Studform, featuring set bead type construction.

Set bead access panels shall be fitted after drywall or ceiling material is installed and before the flushing process.

Access panels shall be of a (300x300, 450x450, 600x600) nominal size, key lockable, with 110 degree concealed hinges.

Access panels shall be constructed from a 0.95 BMT pre-primed zincanneal main frame integrating plasterers ex angle attached, and a 16mm HMR MDF door.

Economi access panel – set bead type

Access panels shall be Comet Economi type as manufactured by Studform, featuring set bead type construction.

Set bead access panels shall be fitted after drywall or ceiling material is installed and before the flushing process.

Access panels shall be of a (300x300, 450x450, 600x600) nominal size, operable with a universal tool or screwdriver.

Access panels shall be constructed from pre-primed steel frame integrating plasterers ex angle, and a pre-primed steel door.